Morningstar’s SunSaver Duo is an advanced PWM two battery controller for motorhomes, caravans, boats and cottages.
This product will charge two separate and isolated batteries at the same time, such as a “house” and an engine battery, based on user selectable priorities.
The SunSaver Duo employs Morningstar’s legendary SunSaver controller technology, whose long-term track record for high reliability and improved battery charging is well-recognized in the solar industry. This controller also includes a backlit remote meter which may be mounted in or on a wall, and displays digital and pictorial status information about the solar power system.
The SunSaver Duo is epoxy encapsulated for environmental protection, is user adjustable via DIP switch or connection to a personal computer, and has an optional remote temperature sensor.
Features
Two Battery Charging
Solar charge current is shared between the two batteries based on a user selectable priority. When one battery is fully charged, all of the charge current flows to the other battery.
Easy to Install
The controller is installed near the batteries using the clearly labeled large wire terminals. The remote meter may be mounted in the wall or on the wall using the included frame. Also includes the meter wiring with RJ-11 connector. Remote temperature sensor.
Provides Useful Information
The remote meter and LED’s display system status data and any system errors. Custom icons and back lighting make the meter easy to read and understand.
Lower Cost
Two battery charging eliminates the added cost of two separate solar charging systems and the need for isolation between the batteries.
Longer Battery Life
Four stage series PWM pulse charging and temperature compensation increases the useful life of the batteries.
Extensive Electronic Protections
The controller will not be damaged by wiring mistakes during installation. There are no fuses to replace, and the controller will automatically re-set after a wiring mistake.
Highly Reliable
Epoxy encapsulation protects the controller against dust and high humidity. Efficient electronics and a conservative thermal design allow the controller to operate reliably at high temperatures. Five year warranty and estimated 15 year life.
Technical Specifications.
Electrical
• Rated Solar Input 25 amps
• Rated Load Output Not applicable
• Battery Voltage 12 volts
• Min. Battery Voltage 1 volt
• Max. Battery Voltage 15 volts
• Max. Solar Voltage 30 volts
• Self Consumption
Controller 6 to 10 milliamps
Remote meter 6 to 15 milliamps
Environmental
• Operating Ambient Temperature
Controller –40°C to +45°C / –40°F to +113°F
Meter –20°C to +60°C / –4°F to +140°F
• Humidity 100% non-condensing
• Tropicalization
Controller Epoxy encapsulation
Annodized aluminum case
Corrosion resistant terminals
Meter Conformal coated printed circuit board
Meter Displays
• Backlighting Push button activated
• LED’s Charging status
Errors
Battery level
• Displays Battery #1 & #2 voltage
Battery charge priority
Minimum / maximum voltages
Solar charging amps / amp-hours
Temperature
Errors
Electronic Protections
• Solar Short Circuit • High Temperature
• Solar Over Current • Lightning
• Reverse Polarity • Reverse Current at Night
Battery Charging
• Regulation Voltage
Sealed Battery 14.1 volts (at 25°C, 77°F)
Flooded Battery 14.4 volts (at 25°C, 77°F)
• Float Voltage 13.7 volts
• Equalization Voltage* 14.8 volts
• Temp. Compensation –30 millivolts per °C
(25°C reference)
• Type of Charging Series PWM
4 stage: bulk, PWM, float,
and equalize*
*used on flooded battery only
• Battery Charging
Priority 90% / 10%
50% / 50%
Customize via PC connection
Mechanical
• Controller 17.0 x 5.6 x 4.1 cm / 6.7 x 2.2 x 1.6 in.
• Meter 9.7 x 9.7 x 3.1 cm / 3.8 x 3.8 x 1.2 in.
• Meter back 7.4 cm / 2.9 in. diameter
2.8 cm / 1.1 in. deep
Fits 7.6 cm / 3 in. round hole
• Weight
Controller 340 g / 0.75 lb
Meter 135 g / 0.30 lb
• Largest wire 16 mm2 (#6 AWG)
• Meter wire 10 m / 33 ft
Options
• Remote Temperature Sensor — Measures temperature
at battery for improved battery charging
Certifications
• CE Compliant
• Manufactured in a certified ISO 9001 facility
